ENLIGHTEN™ Manual: Hardware Configuration

<< BATCH DATA COLLECTION | TABLE OF CONTENTS | HARDWARE SETUP >>


Wasatch Photonics makes many different models of spectrometer, and individual units within a product line will each contain unique configuration and calibration settings. Other settings such as temperature will vary dynamically during runtime. All of these different settings and device parameters are viewable using the ENLIGHTEN™ “Hardware” screens (accessed through the “Techniques” pull-down menu).

5.1 Hardware Setup

The Hardware Setup page has two sub-pages: Hardware Details and Logging.

5.1.1 Hardware Details

The Hardware Details page provides a scrollable list of hardware settings, including serial number, excitation wavelength, wavelength calibration, TEC and gain coefficients and the like. All of this information is read-only at this time, but is useful in understanding and explaining your spectrometer’s behavior and performance envelope.

Future versions of ENLIGHTEN™ may make some of these values writeable to authenticated knowledgeable users.

5.1.2 Logging

The logging view shows a colorized scrolling event history of application state. The logging level can be increased by ticking the “Verbose logging” checkbox. See the section for additional information on using the application log for troubleshooting.


<< BATCH DATA COLLECTION | TABLE OF CONTENTS | HARDWARE SETUP >>